Home >

The "Mid 12Th Five-Year" Development Plan Of Industrial Textiles "Mid Market Results"

2013/12/25 16:15:00 40

Development Planning Performance Textiles

2010~2012 years, industrial use < a href= "//www.sjfzxm.com/news/index_c.asp" > textile > /a > total annual growth of 10.9% of the total fiber processing. If this speed is developed, the total amount of industrial fiber textile processing will reach 13 million 780 thousand tons in 2015, exceeding the target of "12 million 900 thousand tons" in planning, and the high performance fiber will be used in the field of industrial textiles for the most part. In 2012, China's high-performance fiber production capacity exceeds 120 thousand tons (including high strength and high modulus polyvinyl alcohol fiber production capacity of 50 thousand tons), and the total consumption of high-performance fibers exceeds 70 thousand tons.

strong > scale expansion product upgrading /p >

full implementation stage goal /p >

accounted for more than 22% of total textile fiber processing

2015, the total output value of the industry will reach 10226 billion yuan

2012, the total amount of industrial fiber textile processing was 10 million 100 thousand tons, accounting for more than 22% of the total textile fiber processing. According to this development speed, the planning target of 25% of the total textile fiber processing volume in 2015 could be achieved.

In the 2010~2012 years, the total amount of textile fiber processing increased by an average of 10.9% per year. If this speed is developed, the total amount of fiber processing in industrial textiles will reach 13 million 780 thousand tons in 2015, exceeding the target of "12 million 900 thousand tons" in planning, and the high performance fiber will be used in the field of industrial textiles for the most part. In 2012, the high performance fiber production capacity in China will exceed 120 thousand tons (including high strength and high modulus polyvinyl alcohol fiber production capacity of about 50 thousand tons), and the total consumption of high-performance fibers will exceed 70 thousand tons.

According to the Association estimates, the total industrial output value of the whole industry in 2012 was about 728 billion yuan, and the average annual growth rate was 12% in 2010~2012 years. According to this growth rate, the total output value of industry will reach 10226 billion yuan in 2015, and the target of "1 trillion yuan" will be completed.

the proportion of R & D expenses increased by 0.5 percentage points .

there are 15 provincial enterprise technology centers in the whole industry

according to the Association statistics, in 2012, the proportion of R & D expenses of the 110 key enterprises in the industry accounted for 3.23% of sales revenue, 0.5 percentage points higher than that in 2010, and it is expected to reach 4% by 2015, so as to ensure that enterprises above Designated Size achieve 1.5% development goals.

By the end of 2012, there were more than 20 provincial technology centers in the whole industry, covering geotextile textiles, textiles for pport vehicles, textiles for filtration and separation, medical and sanitary textiles, sails and nonwovens.

It is expected that through the training and development of the second half of 12th Five-Year, we can achieve the goal of building 3~5 state-level enterprise technology centers.

As of 2012, the average annual growth rate of labor productivity of Enterprises above Designated Size in the industry is more than 10%. It is expected that the goal of middle age growth of more than 10% in planning will be completed at the end of 12th Five-Year.

At present, China's high temperature gas filtration materials have reached the filtration accuracy of 1~2mg/m3. The spunbonded melted nonwovens have achieved the "three resistance" effect. The geotextile textiles have been exported in the form of products and overseas projects, and three of them have basically reached the international advanced level, and have completed the goal of "planning". P

the first super billion industrial cluster in Lingxian County, Shandong, /p >

the output value of Hubei Peng Chang and Fujian Youxi will exceed 10 billion /strong

by the end of 2012, there were 6 enterprises in the industry whose sales income exceeded 1 billion yuan or above, and 3 enterprises with more than 2 billion yuan.

It is estimated that at the end of 12th Five-Year, the goal of developing 3~5 enterprises with international competitiveness and sales scale of more than 5 billion yuan will be completed.

In 2012, the output value of Shandong Lingxian County geotextile textile material industrial cluster reached 13 billion 200 million yuan, becoming the first cluster of more than ten billion industries. It is estimated that by 2015, the output value of Hubei Peng's nonwovens and products cluster and Fujian Youxi leather base industrial cluster will exceed 10 billion yuan, initially forming the industrial pattern with complementary advantages in eastern, central and western regions.

spunbonded spunlace technological pformation to achieve energy saving and emission reduction effect

1 million tons of recycled fiber has been used in the field of industry

the spunbonded process and Spunlaced technology with wide application potential and great energy saving potential have been achieved in recent years through technological improvement to achieve the effect of energy saving and emission reduction. The energy consumption of the major industrial textiles units has been reduced by about 15% in recent years. In 2012, the regenerated fiber production in China was 5 million 300 thousand tons, of which nearly 1 million tons were used in the field of industrial textiles, and the proportion of recycled fiber used in the total textile fiber processing in that year exceeded 15%. At present, the water reuse rate of domestic advanced spunlaced nonwovens production technology has reached 95%.

key tasks scheduled for .

highlights the development potential of the industry

focus on strengthening the basic technical research of the industry

strong support products and technology upgrading

scientific research institutions, universities and enterprises have further strengthened the basic technology research of industrial textiles in the process of scientific research and actual production through the cooperation of industry, University and research.

The application of high density surface, gradient structure, spunbonded and Spunlaced design and processing technology to study the failure mechanism of filter materials for high temperature bag filter has provided a basic basis for developing new high temperature resistant and corrosion resistant composite filter materials. Using biomass cellulose as raw material, a high safety flame retardant biomass composite lithium battery separator has been developed by melt blown wet coupling technology. It has good electrolyte wettability, heat resistance and flame retardancy, and reaches the pilot scale of production. In the aspect of carding, the parallel network outgoing speed can reach 90m/min, and the speed of cross network laying can reach 60m/min, and the width can reach 3.75m. The technology of spinning and melting realizes the diversification of raw materials. Besides polypropylene (PP) and polyester (PET), polyethylene (PE), poly (lactic acid) (PLA), polyphenylene sulfide (PPS) and other materials are used as spinning raw materials.

forming technology and equipment development speed is faster than /p >

some major technologies have achieved industrialization .

improvement in molding technology and equipment level has made great progress in production speed and width. For example, the SMS spunbonded production line developed by our country has a breakthrough speed of 400m/min, the maximum width can reach 7m, the needle punching machine frequency reaches up to 2000rpm, the high speed needling machine of 2500rpm is being developed, and in the processing of filter materials, the complete set of processing equipment of spunbonded filter material and spunlace felt filter has been broken through.

The shuttle looms are especially suitable for weaving heavy fabric with super wide width, high density and heavy weight. The domestic super wide loom provides equipment support for the production of industrial textiles. The effective width can reach 7.4M and the weight can reach 1500gsm. Melt blowing / airflow forming, spunbonded / needle spunbonded / Spunlaced / Spunlaced, multi-layer compound forming technology and multi axial stereotactic warp knitting technology have all achieved industrialization and improved equipment matching capability, automation level and product quality.

quickening finishing the development of technical equipment .

the realization of localization of some special equipment

after years of efforts, the industry has accumulated some experience in the single functional finishing, matching equipment and chemical finishing agent. Some of the non woven fabric finishing equipment with independent intellectual property rights already has the industrialization ability.

PTFE foam coating dynamic processing equipment and technology can form a compact pore structure PTFE coating on the surface of the filter material, improve the filtration accuracy, prevent the fine dust from entering the filter material, reduce the pressure difference and reduce the energy consumption. The first domestic 5500mm super wide intelligent setting machine has the characteristics of high wind speed, strong heat pfer capability, uniform air injection and uniform heating, so as to solve the technical difficulties of the wide range fabric with large temperature difference. The domestic high-efficiency foam generator and applicator can ensure the uniformity of the foam and achieve the effect of accurate liquid injection.

the rapid development of special fibers for industrial textiles

> a href= < //www.sjfzxm.com/news/index_cj.asp > > fiber > /a > localization industrialization achieved a significant breakthrough /p >

In recent years, with the support of the state, P has made breakthroughs in the localization and industrialization of high performance fibers in China. It not only improves the R & D level and production capacity of special fibers for industrial textiles, but also breaks the monopoly of foreign companies' technology and market, greatly reduces the import prices of products, and has strongly promoted the progress of the industry.

The production capacity of membrane cracking fiber, wire and membrane products has reached the level of 1000 tons; the aramid fiber has achieved the automatic production of stable quality; the annual output of ultra-high molecular weight polyethylene fiber is about 20 thousand tons; the annual production capacity of polysulfone fiber is more than 10 thousand tons; the annual production capacity of carbon fiber is more than 10 thousand tons; the production of ultra-fine fiberglass of 3.5um has been realized, the softness and abrasion resistance of products have been improved, and the applicability of products has been improved; the high temperature basalt superfine fiber has entered the stage of industrial production and engineering application; some biomass fibers have been industrialized in production; at present, they are actively expanding their application fields; and the development and production of special fibers such as hydrophilic, antibacterial, flame retardant, high elastic and low shrinkage have made significant progress, partly satisfying the demand for subdivision products in the downstream area. In terms of the substitution of imported fibers, in 2012, the annual production capacity of PPS fiber in China exceeded 15 thousand tons, and the annual production capacity of PI fiber was about 3000 tons; PTFE

the collaborative development of terminal products customers is strengthened.

solve the practical problems of the industry and expand the application market

enterprises in the industry actively cooperate with design units and end customers to promote the collaborative development of industrial textiles and end products.

针对南水北调工程过程中，由于界面摩擦力不足导致土工膜下滑，无法施工的问题，与下游客户一起攻克了土工布加糙的技术难题;车用纺织品生产企业与整车生产厂家合作，根据终端产品客户具体需要进行产品设计和生产;与下游企业合作攻克了天然纤维复合材料强度不足的技术难题，使其成功应用于交通工具领域;滤料、滤袋的生产企业，与下游除尘器设备生产企业合作，通过选用高性能纤维，进行滤料结构设计等方式，开发具有高效、低阻和PM2.5控制效果的新型产品;协同开发的多轴向增强织物一次性热塑成型产品，具有优异的力学性能和耐腐蚀、防霉、绿色环保、可回收利用等特点，可替代金属制品应用于交通工具轻量化;高速公路护栏、柔性管罐等终端制品的开发与应用，也都拓展了结构增强用纺织品的应用领域。

terminal and engineering users' service capability has been raised comprehensively

extending the industrial chain to enhance the level of enterprise profit

in recent years, bag type dust removal technology has been well applied in industries such as power, cement, steel and metallurgy. Some filter bag backbone manufacturers have begun to cooperate with users of power plants and provide a full range of engineering services in the process of filter bag design, use and replacement, which not only improves the level and efficiency of engineering services, but also improves the profitability of enterprises.

Some backbone manufacturing enterprises in the geotextile industry have set up engineering companies relying on their own technology and product advantages to undertake road works, railways, water conservancy and other geotechnical construction projects in the form of the total package, and enhance their service capabilities and enterprise profit levels by extending the industrial chain.

actively promote R & D and testing certification service platform construction /p >

strengthen product testing and quality supervision to ensure the safety of use

In the past two years, under the active promotion of trade associations, P has set up the "China Industrial Textiles Application Research Center" and "China Industrial Textile numerical control tailoring technology R & D center" and so on. As a platform for production, research and research, it has formed a research and development mode of linkage with downstream enterprises, laying the foundation for improving the quality of products and equipment.

We should actively promote the construction of R & D and testing certification service platform, strengthen product testing and quality supervision, and ensure the safety of product use.

Relying on local inspection centers and research institutes, a number of "China textile industry testing center" has been set up throughout the country to provide testing support for product quality and safety.

At the end of 2012, the strategic alliance for technological innovation of industrial textiles industry is an important part of building an innovative country strategy and an important channel for national technological innovation projects. It will play a positive role in pforming scientific and technological achievements into real productive forces, supporting and leading the development of industries.

The expert committee of China Textile Industry Association established in 2011, checks the direction of the development of science and technology in the industry, and provides the overall technical support platform for industrial textiles.

establish multi-level and multi-modal information service network /p >

Close upstream and downstream contacts and actively promote international exchanges /p >

establish a multi-level and multi-modal information service network to provide scientific basis for enterprise investment, product development and market expansion; through the introduction and improvement of periodicals, websites, mobile newspapers and publishing exhibition technical reports, etc., timely pmit information on policies, markets, technologies, exhibitions, etc.; strengthen thematic research on hot and difficult issues in the industry, combined with the National Bureau of statistics and customs data, form quarterly quarterly operation analysis reports; provide services for park development planning, consulting research reports and industry economic analysis according to the needs of local parks, economic development zones and enterprise development.

Organize activities with upstream associations and enterprises, downstream users, Chinese Academy of engineering and foreign associations, to demonstrate the overall image of the industry, closely link upstream and downstream, and expand industrial influence.

To strengthen international exchanges between industries, we have signed a cooperation agreement with the US nonwovens Association, the European nonwovens Association, the United States International Industrial Textiles Association, the German textile and garment industry association, the Taiwan nonwoven industry trade union, the Korean Industrial Textiles Association, and so on. They have reached cooperation intentions in information sharing, standard cooperation, forum exhibition, technical training and so on, enhancing the international status and influence of the industry, and enhancing the industry's service ability of the association.

standard management system is improving and standard construction is strengthened.

< a > href= > //www.sjfzxm.com/news/index_q.asp > > whole trade system < /a > revises the 35 standards to make up for the lag of development /p >

strengthened the construction of standardization organization, and completed the work of the national textile Standardization Technical Committee's industrial textiles branch meeting, adjustment and supplement, and formed the third technical committee.

The members of the new sub committee are composed of representatives from research institutes, testing institutions, universities, industry associations and enterprises, covering all fields of the industry.

In the first half of the implementation of the plan, 35 amendments were made in the whole industry to make up for the lack of standards and lagging behind in the rapid development of the industry.

The Industrial Textiles Association has carried out the research on the standard system of industrial textiles products and applications, and has undertaken and completed the Ministry of industry's "Research on the standard system of industrial textiles products and Applications".

The Ministry of General Armament has been entrusted with the task of organizing the experts, enterprises and related units to clean up and consolidate the 50 national military standards for the centralized management of the textile industry.

raw material and technological progress help product high structure

the core competitiveness of enterprises in most industries is significantly enhanced

＜p＞　　高性能纤维的推广应用和工艺技术进步，促进了产业用纺织品的一些产品实现了高构化，其中，医疗与卫生用纺织品由简单的个人卫生用品材料，逐渐发展医疗用敷料、手术洞单、手术服、手术包等高技术含量产品;过滤与分离用纺织品由传统的常温空气过滤、水过滤，逐渐发展丰富到耐高温、耐腐蚀滤料领域;土工与建筑用纺织品由简单的防水排水功能，丰富到高铁、水利工程、高速公路专用路基增强材料和防渗漏材料;交通工具用纺织品日益重视环境友好性、节约能源和可回收再利用，促进了轻量化和燃油经济性进程;安全与防护用纺织品由简单的功能后整理，逐渐发展到高性能纤维原料、织造、后整理一体化设计，满足了多功能复合防护的要求;结构增强用纺织品由简单的小型预制件，发展到风力叶片、桥梁修复、结构部件等领域。

the comprehensive strength of the backbone enterprises is significantly enhanced

3 enterprises have sales income of more than 2 billion yuan

More than two years after the implementation of the "P" plan, some key enterprises in the industry have overcome the unfavorable situation after the financial crisis. Through technological import and independent research and development, technological innovation has been realized, production costs have been reduced, product added values have been raised, new projects have been actively developed, new economic growth points have been cultivated, and blasting strength has been achieved.

In 2012, there were 3 enterprises whose sales revenue exceeded 2 billion yuan, and 6 enterprises whose sales income exceeded 1 billion yuan.

Through the listing and financing, enterprises in the industry have provided financial support for the expansion of the industrial scale and the upgrading of the product technology; some key enterprises in the field of high-temperature filtration and geotechnical engineering have extended the industry through mergers, reorganization and joint ventures, and have initially formed an integrated industrial chain with raw material development, material production, terminal products production and engineering services.

characteristic industrial cluster flourishing development

effectively promote regional economic growth /p >

Since P > 2011, the number of industrial clusters in the industry has grown from 5 to 9. The newly increased clusters are mainly engaged in the production of geotextiles, filters, interlining and waterproofing membrane, making the structure of industrial clusters more reasonable.

All industrial clusters take the backbone enterprises as the core, initially cultivate a group of specialized, refined, special and new specialized production enterprises, and gradually improve the industrial chain matching, which not only promotes the development of industrial agglomeration, but also promotes the growth of the total economic volume of the cluster, and effectively drives the economic development of the cluster.

In 2012, the total economic volume of the 9 industrial clusters reached 43 billion 200 million yuan, an increase of 1 times compared with 2010.

At the same time, the construction of various public service platforms such as detection, information, R & D and training in the industrial cluster has made great progress, and the service capability has improved significantly. The R & D capability and scale of the backbone enterprises in the cluster have been further improved, and the brand awareness and radiation ability of the industrial clusters have been strengthened.

industrial area layout is becoming more and more reasonable

the proportion of industries in the central and western regions has been raised

> strong > /strong > eastern coastal areas have unparalleled geographical advantages, economic advantages and supporting advantages of industrial chains in other regions. Therefore, Zhejiang, Jiangsu, Guangdong, Shandong, Shanghai and Fujian are still the most concentrated areas of industrial textiles in China, and some products have more than 70% of the eastern coastal areas.

In the first half of 12th Five-Year, there were relatively few cases of industrial pfer to the central and western regions. However, the production enterprises of textiles for geotextiles and pport tools began to invest in the central and western regions on the basis of market and cost factors, making the proportion of non-woven and industrial textiles in the central and western regions increased.

actively promote energy conservation and emission reduction and promote recycling of resources /p >

The water reuse rate of "P > " can reach 95% .

"P" in recent years, China has completed the topic of direct production of polyester filament by waste polyester. The level of the technology products of the waste polyester production of polyester staple fiber has been greatly improved. The recycling economy chain has been formed from the recycling of waste polyester bottles, bottle cleaning and processing, spinning to textile weaving one dragon. The recycling of recycled short fibers for raw materials can reach the standard of sanitary grade and widely used in the fields of nonwovens and vehicle textiles. The recycled polyester filament is widely used in many fields, such as industry and civil, and provides a model for the development of resource conservation and recycling economy in the textile industry.

Recycling fibers have been used in the fields of sound insulation and damping materials for automotive textiles, and construction and geotextiles.

P > in recent years, the scale of the enterprises is expanding and the investment of the industry is increasing. The enterprises adopt advanced equipment with high speed, wide width, low energy consumption and high capacity. It has promoted the technological progress and equipment upgrading of the industry, eliminated a batch of equipment with small single line capacity and low technical content. The water reuse rate of the advanced spuns nonwovens can reach 95%, the energy consumption per unit is 15 tons to 20 tons, the water consumption of the advanced water treatment system and technological equipment can reach 8 tons to 10 tons.

> the six fields are flying together.

annual average growth rate is optimistic

2012 the average annual growth of medical and health textiles was 13.5%

has become the largest area in the industry textile industry /p >

2012, the output of medical and sanitary textiles in China was 906 thousand tons, an increase of 28.82% over 2010, with an average annual growth rate of 13.5%.

Medical and sanitary textiles are the largest areas in the industrial textiles industry. The rapid growth of production capacity and output of non-woven coils for medical and health care is one of the key investment directions in the industry.

＜p＞　　突破了多头纺熔复合非织造布设备及工艺技术难题，制造出3200mm幅宽的SMXS设备，其熔喷部分可进行在线/离线复合，配合后整理技术，应用于“三抗”手术服、隔离服等高端医用领域;以壳聚糖、蚕丝纤维制成的皮肤创伤修复材料及高档女性卫生用纺织品，具有促进伤口愈合，止血性能良好和舒适、高抗菌的性能;利用在线接枝聚合技术，实现了抗菌聚烯烃树脂的产业化生产，制成具有良好杀菌效果的非织造布，克服了疏水聚烯烃纺织品难以兼具杀菌功能的技术难题;研发了可调控生物降解速率的柞蚕丝素三维材料，用于生产丝蛋白创面修复敷料，填补了国内空白;纯棉非织造纱布没有磨脱的纤维屑，不引起伤口感染，手感柔软，并且具有良好的吸收性。

2012, the average annual growth of filter textiles was 15.05% /p >

high temperature filtration and liquid filtration materials maintained a relatively high growth rate

In 2012, the output of textiles for filtration and separation in China was 740 thousand tons, an increase of 32.35% over 2010, with an average annual growth rate of 15.05%. P

In the field of solid-liquid filtration, the market is relatively mature and stable, basically in a saturated state, the growth is relatively slow; in the field of air filtration, with the gradual improvement of the relevant environmental emission requirements of the state, the new filtering project and the existing filter bags have changed the industry so that the industry has maintained a relatively high growth rate.

high temperature filtration, with the improvement of manufacturing technology and equipment upgrading and upgrading as support, many new filtering materials have been developed in the direction of "microfiber", "high density gradient" and "fine filtration", which mainly include ultrafine gradient filter material, water felt filter material and foam coating filter material, and have been applied widely.

liquid filtration has developed high flux and highly fouling resistant functional membrane materials and components. In view of the problem that trace heavy metal ions and organic matter are difficult to be treated by membrane, functional fibers which can be quickly adsorbed and desorbed and regenerated are prepared, and municipal wastewater, industrial waste water and circulating water can be treated.

2012 the average annual growth of geotextile textiles was 11.92% .

the concentration and product grades of the industry were improved

2012, the output of land textiles for our country was 597 thousand tons, an increase of 25.27% over 2010, with an average annual growth of 11.92%.

As the country basically responded to the financial crisis's 4 trillion investment projects and the construction speed of the high-speed rail was greatly slowed down by the accident and other factors, the growth of infrastructure investment slowed down in the first half of the year 12th Five-Year, which has a great impact on the development of geotechnical and building textiles. However, the industry's concentration and product quality have been improved through the development of key projects in the south to North Water Diversion Project and other new application markets.

geotextile textiles, high strength, anti breaking, friction and acid resistant polypropylene geotextiles are applied to the sliding layer materials of high speed rail; high strength and environment resistant polyester filament textile geotextiles are used in landfills; deep water channel dredging works in the Yangtze River, using Geotextiles to construct embankments in engineering design, have achieved good results. Besides, Geotextiles have been widely used in the Three Gorges hydropower project and the south to North Water Diversion Project.

the construction of textiles, the latest development of PET filament spunbonded nonwoven waterproof tire base, has now entered the mass production promotion stage, compared with the original PET short fiber acupuncture products in the same weight condition performance greatly improved, and flame retardant waterproofing membrane, salt resistant waterproofing membrane, ultra-low temperature elastic waterproof membrane and so on also have good functional applicability.

2012 traffic textiles grew by an average annual growth of 8.6%

Application of aramid cellular structure in high speed rail aviation field

2012, the output of China's pport textiles was 498 thousand tons, an increase of 17.94% over 2010, an average annual growth rate of 8.6%. The growth rate slowed down significantly compared with that of 11th Five-Year, mainly due to the continuous decline in the growth rate of China's automobile production in two years, resulting in the total demand growth being exhausted.

Science and technology, developed long fiber reinforced thermoplastic plastics with high specific strength, high specific modulus and high impact resistance will play an important role in the application of automotive lightweight. The application of aramid fiber materials in the high-end field will continue to expand. Aramid honeycomb core material is a sandwich material for high-speed train. It has obvious flame retardance, light weight, energy saving and noise reduction effect. It has been used in domestic high-speed trains. The honeycomb structure material produced by the aramid paper produced by aviation grade honeycomb core material has been verified and tested, and it can meet the special processing and application requirements in aviation field.

2012 the average annual growth of textiles for security purposes was 7.9%

police material is included in the government packaging and procurement plan /p >

In 2012, the output of textiles for safety and protection in China was 264 thousand tons, an increase of 16.42% over 2010, with an average annual growth rate of 7.9%. P

The successful development of fiber materials with good performance and mass production, as well as the improvement of processing technology, have promoted the upgrading of products in the field of safety and protective textiles.

Science and technology, we have developed a new generation of high-performance special police training clothing with flame retardant, high temperature resistance, high strength, antistatic, oil and water repellent, acid and alkali resistance, moisture absorption and quick drying properties. We have developed nearly 100 new products of security fabrics with high-performance fiber materials as main materials, all fabrics are used in the corresponding special protection field, and the police fabrics are included in the government packaging and procurement plan.

The development of PTFE membrane composite profiled fiber / cotton hybrid embedded anti-static fabric, the use of raw materials waterproof, wind protection, moisture permeability and other properties, and in the fabric performance combined with the special fiber guide wet fast drying, cotton fiber comfort and conductive fiber antistatic function.

Using aramid, para aramid and aramid based conductive fibers, the aramid special protective fabric blended with a specific proportion has the characteristics of high breaking strength and short combustion duration.

2012, the average annual growth of structural reinforced textiles was 6%

overcome high-density glass fiber yarn high density weaving problem

in 2012, the output of structural reinforced textiles was 865 thousand tons, with an average annual growth of 6%.

China's carbon fiber investment boom has not been solved due to the difficulties of cost and market development. Its actual output and consumption are still relatively small. At present, glass fiber reinforced material is still one of the main parts in the field of structural enhancement. However, due to the continued downturn in wind power market in recent two years, the growth rate has slowed down, which has led to a slow growth in the output of glass fiber warp knitted fabrics for reinforcement.

In terms of science and technology, the high-density glass fiber yarns were tackled with high density knitted fabric. The semi-rigid battery windshield warp knitted grid material was used in the production of the spacecraft, which greatly reduced the weight of the battery wing and was successfully applied to the Tiangong-1 spacecraft. The 3 megawatt wind turbine blade produced by the imported technology and the carbon fiber composite material used in the main beam cap greatly reduced the weight of the blade and extended the life of the P blade.

the effectiveness of policy guidance is good.

objective problems still need to be concerned with .

policy orientation continuously promotes industry development and product upgrading /p >

"planning" pointed out the development direction for the industry, boosted the morale of the industry, and greatly promoted the healthy and rapid development of the industry.

The implementation of various projects will benefit the major sectors of the industry's textile industry and play a good exemplary role in promoting technological progress and product upgrading.

apply for exemption from customs duties, raise equipment level and product level .

enterprises in the industry actively take advantage of relevant favorable policies and apply for exemption from customs duties and value-added tax to eligible imported industrial textile equipment and products, which improves the equipment level and product level of the industry.

In addition, many industrial textile production enterprises are high-tech enterprises. They can enjoy various tax reduction, tax exemption and other policies, and encourage the enterprises' sense of independent innovation, and enhance their determination and motivation to rely on core competitiveness to enhance the added value of products.

it is urgent to establish an inter departmental and multi-level coordination and coordination mechanism, /p >

it is urgent to establish a cross departmental and multi-level coordination and propulsion mechanism.

The industrial textiles industry covers a wide range of fields and covers many contents. Its orderly development requires coordination, arrangement and co-ordination of various sectors such as industry, development, reform, pportation, construction, hygiene, environmental protection, quality inspection and so on.

urgently need to accelerate the pace of M & A and improve the review mechanism

we need to accelerate the pace of mergers and acquisitions.

We should increase support for M & A and encourage enterprises in the industry to undertake mergers and acquisitions in a timely and appropriate manner, improve the matching of industrial chains, and continue to grow stronger and bigger.

At the same time, we should strengthen the risk control of mergers and acquisitions, improve the security review mechanism of foreign mergers and acquisitions, and ensure the safety of the industry.

accelerate the implementation of the government procurement policy for products in related fields

continue to implement the government procurement policy.

Many products in the industrial textiles industry involve important fields such as health care, safety protection, aerospace, national defense and safety. We should speed up the implementation of government procurement policies for related products in these fields, and promote the healthy development of the industrial textiles industry and downstream key areas.

strengthening industry strength construction /p >

actively preparing for "13th Five-Year" /p >

the output value of private enterprises is far different from that of foreign countries

the low level of industrial structure is still more obvious, and the international competitiveness of high-end products is insufficient.

The domestic industrial textile industry takes private enterprises as the main body, with weak foundation, weak foundation and weak core competitiveness. Compared with the same industry abroad, the output value of products varies greatly. China still needs to import a large number of high-end products every year.

low end capacity agglomeration causes the industry to increase the risk of operation

the main way of competition in the domestic market is mainly price competition. The development of enterprises is mainly based on simple imitation. The gathering of low-end capacity sets causes the risk of increasing operation, the decrease of capital investment efficiency and the more complicated market order.

pursuit of scale efficiency leads to the weakness of new product development

the dilemma of technological innovation is outstanding.

The breakthrough of high-tech products is limited, and most enterprises still pursue economies of scale.

Due to the decline of profits, it is difficult to invest a large amount of funds to develop high-end products. The development strength of new products is weak, and the development of products with high technological content is slow.

lack of professional personnel, limiting the progress of science and technology in the industry

basic research is weak, independent brands, meticulous management and professional personnel are missing in varying degrees.

Compared with the speed of industrial development, the basic research ability of the industry is weak, and the scale and speed of professional and managerial personnel training are still too small and too slow, which limits the healthy development and scientific and technological progress of the industry.

matching capability is weak, so it is difficult to face the final market independently. /p >

lack of complete supply chain from special raw materials, special equipment and engineering services, market control capability and supporting capability of industrial chain are weak.

Most enterprises in the industry are supporting related industries. It is difficult to become an independent and complete product. Facing the final market, they are often constrained by the market behavior of the supporting products, and are in a low value-added link in the industrial chain, which is seriously contrary to the essential characteristics of the technical value of the industry.

the market development is weak and the new application area is slow.

market development is generally weak, and new application areas are slowly increasing.

The development of new markets and new applications of the industry, of course, requires the promotion of policies. At the same time, it is necessary to strengthen cooperation between upstream and downstream industries, break the boundaries of industries, speed up the process of product development and marketization, and truly realize the dream of "unlimited replacement" of industrial textiles.

the lack of coherence between the relevant standards has not yet been unified

the relevant standards of industrial textiles have not yet been unified, and there is insufficient coordination between standards.

Industrial textiles are widely used in various fields. Different types of products have different technical requirements in different application fields, and the industry lacks the overall design of standard system.

market supervision and industry self-discipline shortage lead to vicious competition /p >

market regulation and industry self-regulation are still insufficient.

Some products are homogenized, and the quality of products is different. The vicious competition and unfair competition occur frequently in the market.

the tightening of macroeconomic environment affects export growth rate /p >

the macro economic environment at home and abroad is tightening.

After the world financial crisis, the economies of the developed economies such as the United States, Europe, Japan and other developed economies were seriously affected, and the recovery was relatively slow. The economic development of emerging economies and developing countries also showed a marked slowdown. At the same time, the growth rate of China's economy slowed down in the past two years, and it will also enter a relatively stable growth range.

These will affect the development of China's and global market demand for industrial textiles, and will also significantly affect the export growth rate of China's related products.

the market demand for industrial fiber will obviously slow down in the next 3 years

the overall demand for the market has maintained a relatively fast growth, but the growth rate has slowed down.

The application range of industrial textiles is very extensive. The proportion of textile processing products in the United States and Japan accounts for more than 40% of the textile fiber processing volume. However, the proportion of industrial fiber in China is only 22%, which is still obviously low and has huge room for growth.

But with the slow down and slow recovery of the world economy and China's economic growth in recent two years, the growth rate of market demand is expected to slow down in the next 3 years.

international enterprises monopolize high-end products and blockade China /p >

industrial textiles have high technology content and wide application fields. Many products are used in aerospace, military and defense fields. The developed countries such as the United States, Europe, Japan and other developed countries not only attach great importance to it, but also master or monopolize the manufacture of high-end products and their raw materials and high-end equipment. Many high-end products and high-end equipment also carry out technical and product blockade in China.

to cope with the global environmental problems, the pressure of energy conservation and emission reduction will continue to increase. /p >

the pressure of energy saving and emission reduction has increased significantly.

The eighteen put forward "strive to build a beautiful China and realize the sustainable development of the Chinese nation", and for the first time integrate the construction of ecological civilization into the "five in one" overall layout of the cause of socialism with Chinese characteristics.

With the rapid development of industrialization and urbanization, the total economic output will still maintain a relatively rapid growth, and the consumption of energy resources will also increase. The basic national conditions of the limited environmental capacity will not be changed. The targets of pollution abatement and emission reduction are increasing and the potential is decreasing. Meanwhile, while digesting the increment, we should continuously reduce the stock, and the task of energy conservation and emission reduction is very arduous.

At the same time, global environmental issues such as climate change and biodiversity have become the focus of interest competition among all countries. China will bear more international pressure and the pressure on global environmental problems will continue to increase.

strong > 13th Five-Year will focus on the development of downstream key areas /p >

During the period of 13th Five-Year, it is the critical period for China's "a href=" //www.sjfzxm.com/news/index_f.asp "Textile Industry > /a" to realize the strong textile power. The industry textile industry shoulders the important task of leading the textile industry to develop continuously and promoting the pformation and upgrading of the textile industry. The task is arduous and the responsibility is great.

At the same time, the international and domestic economic environment and industry development environment faced by the industry will be more complex and changeable.

Therefore, it is very necessary to carry out the preliminary research on the 13th Five-Year plan ahead of schedule.

The key points include: focus on analyzing and judging the international and domestic macro-economic development, international trade growth, the textile industry and related industries development and market competition in the "13th Five-Year" period.

The key problems of domestic industry development during the period of 12th Five-Year are mainly analyzed, the main causes of the problems are analyzed, and the solutions for "late 12th Five-Year" and "13th Five-Year" are put forward.

We should focus on the development trend of international industrial textiles and their downstream key areas, and track the development of high technology and equipment in the international industry.

The key tasks of China's industrial textiles industry are studied, and the key tasks for refining the task are also discussed.

"joint efforts of government and enterprise" /p >

ensure the smooth ending of the plan

strengthen government guidance, establish access conditions management and traceability mechanism

strengthen the inter departmental coordination mechanism under the guidance of the government, establish a quality assurance system, and strengthen access management or certification.

We should strictly supervise the production and use of products in the industry chain, ensure the quality and standard use of products, and establish access conditions management and traceability mechanism for key products related to the national economy and the people's livelihood.

speed up the key areas of standards, cross industry coordination and joint development mechanism

under the supervision and coordination of the relevant competent departments of the industry, we should speed up the standardization, cross industry coordination and joint development of the key product areas, simplify the procedures for the establishment, application and approval of the key standards, speed up the construction of the standard system, promote the coordination and mutual recognition of the upper and lower vernier standards, and set up the National Standardization Committee for the standardization of industrial textiles as soon as possible, so as to form a unified standard system for the industry.

using service platform to form a continuous innovation mechanism to promote downstream participation in /p >

make full use of the innovative service platform such as the technological innovation strategic alliance of the industrial textile industry, form a continuous innovation mechanism, promote the participation of downstream users in the industry innovation alliance, grasp the independent intellectual property rights, reduce costs through technological innovation and industrial production, further improve the profit margins of products, and achieve the wide replacement of high value-added products and services.

We should accelerate the development of enterprises to improve R & D mechanism, enhance R & D level, do a good job of guidance and training, and build at least 3 state-level enterprise technology centers to the end of 12th Five-Year.

strengthening industry self-discipline and standardizing market order, forming third party detection

strengthen industry self-discipline and standardize market order.

It is necessary to strengthen the integration of production, teaching and research with the platform of key laboratories and engineering technology centers, and establish and improve the public service platform such as product development and application, quality inspection, product certification, etc., and form the third party performance testing and certification service mechanism as soon as possible, so as to promote the high level, rapid and healthy development of the industry.

enhance the voice and market influence of the industry and enhance customer awareness. /p >

to further enhance the voice and market influence of the industry, so that end-users can become more familiar with high-tech textiles and understand the benefits of these innovations.

exploration < a href= "//www.sjfzxm.com/news/index_s.asp > > Trade Association < /a > new service mode give full play to supporting role /p >

to explore the service mode of trade associations that meet the needs of the socialist market economy, and gradually establish the market position and role of trade associations in the industrial development, improve the institutional mechanism innovation of the association, standardize the daily operation and management of the association, give full play to the social practice of the association's bridge and supporting role, and constantly improve its service capabilities.