Production Safety Alarm For Dyestuff Enterprises

< p > our country is < a href= "//www.sjfzxm.com/news/" > dyestuff production < /a > big country, there are many dyestuffs enterprises, and in recent years, many new enterprises have been built and expanded.

Dyestuff is a typical modern chemical industry. Modern chemical industry has the characteristics of large scale, energy intensive, fast speed and many products.

The problem of safe production in the dyestuff industry is quite prominent. After entering the summer, many dyestuffs will face the test of extreme weather. The high temperature, rainfall, drought and thunder and lightning in summer bring some unsafe factors to dyestuff enterprises, and the situation is more severe.

Measures must be taken to solve the problem of safety production accidents in the dyestuff industry.

< /p >

< p > < strong > grasp the "five prevention" in summer "/strong > < /p >.

< p > < strong > lightning protection, explosion protection, fire prevention, flood prevention and heatstroke prevention < /strong > < /p >

< p > summer "five prevention" means "lightning protection, explosion protection, fire prevention, flood prevention and heatstroke prevention".

In summer, thunderstorms must be well protected against lightning and dampproof for Electromechanical, power and instrumentation equipment, so as to ensure the safe operation of enterprise installations in summer.

It is necessary to conduct a thorough and thorough verification of all the lightning protection and grounding conditions of all electrical appliances, meters, etc., and correct the problems in time so as to avoid any oversight.

In case of thunderstorm, we should do some self protective measures.

In summer, high temperature, explosion protection and fire prevention are the safety of dyestuff enterprises in summer.

The most sensitive parameters of dye chemical production are temperature and pressure. Once the control is not good, there will be accidents, and the reactions are strongly nonlinear.

Therefore, we must be careful and careful in production.

Any abnormal change of temperature, liquid level and pressure should be identified and handled correctly. No suspicious points should be missed during inspection.

Every wrong operation or passing suspicious points may cause a major accident.

We should also smooth drainage facilities, prevent floods and prevent heatstroke.

In short, the production safety situation of dyestuff and chemical industry in summer is more severe. < a href= "//www.sjfzxm.com/news/index_c.asp" > dye chemical safety > /a > the accident has entered a multiple period.

For this reason, enterprises must do well in summer "five prevention" and intensify the production safety of dyestuff industry in summer.

< /p >

< p > < strong > really do solid work to achieve five implementation < /strong > < /p >

< p > < strong > implementation of hidden trouble, rectification, personnel, responsibilities and measures < /strong > /p >

After entering the summer of P, many dye chemical enterprises exposed their potential safety problems. For example, some enterprises had problems in warehousing facilities and problems such as poor sealing. Due to the particularity of raw materials, processes and products, some raw materials and products were easily volatilized and dispersed, resulting in irregular emissions and serious air or water pollution. Once the serious pollutants such as toxic chemicals and dangerous goods were leaked and spillovers, the consequences were unthinkable, and it would bring difficulties for emergency rescue and personnel rescue.

< /p >

< p > there are still some enterprises whose installation level is not high, especially the slow progress of automation pformation of some old enterprises, and their safety setting standards are also low.

In some enterprises, the installation quantity of flammable and toxic gas leakage detection alarm is insufficient, or the installation location does not meet the requirements; some enterprises' production alarm detection devices are only local alarm, but can not be sent to the control room and field operation room where the operator is stationed.

Some enterprises still have some problems in adopting positive pressure ventilation measures. The position of positive pressure ventilation and suction outlets is located in the dangerous area of fire and explosion, especially the positive pressure ventilation of the slip ring chamber of the compressor, which can not guarantee that the fresh air is inhaled, and some facilities such as cooling and flood prevention, fire prevention and so on are not available.

For the hidden danger of the above devices, the enterprise bosses must be the first responsible person and invest the necessary funds to carry out safety technical renovation or renovation.

Whether it is safety facilities or safety management methods, it is inseparable from human operation and implementation.

For chemical enterprises, it is necessary to line up the hidden dangers that may cause accidents in specific production links, and make plans to implement them.

We should register and record the key parts of the workshop and the responsible persons, so as to strengthen the sense of responsibility.

At the same time, enterprises should strengthen safety training for all staff, and three level education for employees' safety production needs to be strengthened step by step.

In particular, the education, supervision and inspection of the safety operation procedures of the first-line operators should be institutionalized and regular.

< /p >

< p > < strong > increase safety supervision and do three pipe < /strong > /p >

< p > < strong > dare to supervise, supervise, supervise, < /strong > /p >

< p > for the safety supervision department, we should make full use of the sacred regulatory duties entrusted by the people and the government, no matter which level, which boss, whose business, whether central, local or private, no matter how hard the background of the enterprise is, you must dare to supervise and not shrink your head.

< /p >

< p > at the same time, dye chemical safety is an interdisciplinary work. It is a complex system engineering. It has both policy and regulatory problems, as well as technical and management problems. Therefore, as a "a href=" //www.sjfzxm.com "dye chemical" /a "safety regulator, it must become a dye chemical expert, supervised by regulators, and no longer dare to play tricks.

< /p >

< p > regulators will also supervise and control, which requires combining chemical supervision practice, constantly innovating work methods, stressing working methods and art, and improving supervision level and effectiveness.

If we can take unannounced visits and increase the intensity of unannounced visits, governments at all levels and departments of safety production supervision should make unannounced visits to some dyestuff enterprises on a regular basis. We should issue a rectification directive for the safety production problems of dyestuffs released by unannounced visits, and issue a rectification directive, seriously calling for < a href= "//www.sjfzxm.com" > dye enterprises < /a > conscientiously do a good job in correcting hidden dangers.

For those enterprises that are not yet in line with rectification, they should be ordered to stop production immediately or stop work and continue to rectify the situation, so as to ensure that the hidden danger is completely eliminated.

< /p >